Shanghai ShengXuan Environmental Engineering Co.,LTD
Shanghai ShengXuan Environmental Engineering Co.,LTD Austin Industries Filter - The best filtration solutions
Add to Cart
20-2000 micron rated Nylon filament bag filters welded with plastic ring
The NMO nylon mono filament mesh filter bag used for the absolute accuracy of the surface.They use of the a single fiber mesh filter made of woven textiles.Non-deformation of the fiber in accordance with the textile design into a specific network, and increase fusion welding to increase its strength.To filter impurities trapped in the material surface direclty.Absolute precise surface filtration, absolute rating filtration material , single filament fiber structured non deformed fiber . The advantage is the filtration net can be reused after using and low consumption. Such type of sieve mesh is 25,37,50,80,100,150,200,250,300,400,600,800 and 1200 microns.
Features
Seam treatment: ultrasonic welded or thread stitched
Seal ring options: Polypropylene or polyester SDS, STS, Zinc coated steel or stainless steel snap fit rings.
Ring attachment: Ultrasonic welded or thread stitched
Micron range:1,3,5,10,25,50,75,100,125,150,200 micron are available.
Efficiency: Nominal rating, 85% contaminant particle retention efficiency with a single pass.
Surface treatment: Fiber migration and extractable free glazed media surface treatment.
Media grade: Exclusively FDA compliant media , silicon free, and oil free.
Optimum replacing pressure differential 0.10 Mpa, Max 0.18 Mpa
Broad chemical compatibilities.
Technical Specifications
| Bag size | Filter Area(m2) | Volume(Litre) | Max.flow(m3/h | Diameter | Length |
| P1S | 0.25 | 7.9 | 20 | 7” | 17” |
| P2S | 0.5 | 17 | 40 | 7” | 32” |
| P3S | 0.08 | 1.3 | 6 | 4” | 9” |
| P4S | 0.15 | 2.5 | 12 | 4” | 15” |
| The above dimension meet international standard.We also supply bags filter as per customers’ special requirements. | |||||
Chemical Compatibility
| Filter media | Acids | Bases | Solvents | Oxidizing | Temp. |
| Polyester | Good | Good | Excellent | Limited | 150-170 |
| Polypropylene | Excellent | Excellent | Good | Excellent | 90-110 |
| Nylon | Fair | Good | Excellent | Fair | 150-170 |
| PTFE | Excellent | Excellent | Excellent | Excellent | 250-300 |
Micron/Mesh Conversion Table( Nylon /NMO)
| Micron | 1000 | 840 | 710 | 590 | 500 | 420 | 350 | 300 | 250 | 200 | 180 | 150 |
| Mesh | 18 | 20 | 25 | 30 | 35 | 40 | 45 | 50 | 60 | 70 | 80 | 100 |
| Micron | 100 | 90 | 75 | 60 | 53 | 44 | 37 | 30 | 20 | 15 | 10 | 5 |
| Mesh | 150 | 170 | 200 | 230 | 270 | 325 | 400 | 500 | 625 | 1000 | 1250 | 2500 |
Applications:
Auto coating & paint
Water purification& processing
Pharmaceutical
Food& beverage
Bulk &fine chemicals
Electronics
Shipping way & Package details :
By sea / air / express
Shanghai / Ning Bo/Tianjin
Carton Box Dimension: 40cmx50cm x60 cm
Gross weight: 12 kgs per box
Qty inside: 100 pcs P1S
How to replace the filter bag
Change-out Pressure Differential: The recommended bag filter change-out pressure differential across the bag media is 0.10MPA ( 15 PSI). Continuing beyond this point will result not only in rapid flow rate reduction and contaminant unloading, but also increase the risk of filter rupture. The max differential pressure allowed is 0.23 MPA( 35PSI).
Removal of use filter: During operation, the filter media many be embedded into perforated on the basket under excessive pressure, making it difficult to remove the bag filter.When this happens, don’t use excessive force to pull the bag, as it will break the ultrasonic welding line and detach the seal ring form the bag body. To safely remove the bag, shake the basket rapidly and then use a spine motion to separate the bag from the basket, slowly pull the use bag filter out.